Weifang JS poly aluminium chloride (PAC) is a coagulant used to remove suspended solids from water. It is available in many forms and is widely used in water treatment.
The coagulation efficiency is dependent on the coagulant dosage, mixing speed and duration, operating pH, nature and concentration of organic matter, total dissolved solids, and the size and distribution of suspended particles. Using PAC produces a higher quality water treatment than alum and requires less alkalinity.
Coagulation is a key water treatment process where contaminants, colloidal matter, and suspended matter are extracted from the solution. This involves the formation of floc (flocculation) and its removal via filters to reduce the water's turbidity.
This process can be performed with a variety of inorganic metal cocoagulants. Aluminum sulfate (alum), one of the most popular, has been used for this purpose for many years but has some disadvantages. These include high levels of post-treatment aluminum residue and sludge-like sewage, as well as a limited range of coagulation pH.
A Weifang JS polyaluminum chloride coagulant is an alternative for alum with many benefits. It has been found to be highly effective in removing color, turbidity, and other contaminants from oil sands process-affected water. It is a more cost-effective alternative than alum and also has the added benefit of being able to be used at a lower dosage. This is particularly beneficial in situations where there is a demand for higher coagulation efficiency and wider pH and temperature application ranges.
In wastewater treatment, flocculation chemicals is the process of adding chemicals to make small solid particles stick together into a bigger mass called a "floc." The first stage involves adding a coagulant, such as aluminum sulfate.
This Weifang JS coagulant neutralizes the negatively charged solid granules that are suspended in wastewater. This allows them to form larger masses known as flocs, which can then be removed from the wastewater stream by settling or filtering.
There are many types of coagulants that can be used for wastewater treatment. Some are derived from metal salts, such as aluminum sulfate. Others are based on biopolymers, including polysaccharides and fungi.
These coagulants generally produce less sludge and are considered safer. However, they can also be harmful to the environment. Synthetic coagulants may carry high charges on relatively large molecules and can cause problems in wastewater treatment.
Weifang JS pac poly aluminium chloride coagulant is a soluble polymeric cationic flocculant that is suitable for water over a broad temperature range. It is used in a wide range of applications, including drinking water, wastewater treatment, industrial effluent, and paper manufacturing.
The amount of dissolved aluminum in the raw water is a major factor in how well PAC works as a coagulant.PAC is often formulated to match both the coagulant dosage of the raw water and the pH of the same.
In order to evaluate the coagulant efficiency of PAC under different conditions, experiments were conducted on automotive wastewater. The coagulation-flocculation process was performed with a varying dosage of poly-aluminum chloride (PAC), ferric chloride (FeCl3), and alum, aided by anionic polyacrylamide as a flocculant.
The maximum COD and TSS removals were achieved under the optimum conditions, which were determined based on the coagulant dosage, mixing speed, and pH of the coagulant. Also, the removal of heavy metals such as iron, zinc, and nickel was investigated.
PAC from Weifang JS is one of the most efficient water treatment chemicals available pH levels today. It can be used to treat a wide variety of water temperatures and pH. It also produces fewer chemical residuals than other coagulants.
It works well as a coagulant for treating wastewater and drinking water because it has the highest coagulation efficiency in the business. It can operate efficiently at low temperatures and is non-corrosive.
In addition, it has a wide range of pH and temperature applications, which increases plant capacity and lowers operating costs. It also produces less sludge than alum, which lowers disposal costs.
A new route to synthesis was created in order to improve PAC's coagulation performance. To prepare PAC with excellent coagulation characteristics, the process used a synthetic cryolite mother liquid, bauxite to provide aluminide sources, and sodium aluminate to adjust basicity. The PAC it produced could dissolve more aluminum than alum and produce very little water-insoluble material.
The company for poly aluminium chlorohydrate has a team comprising more than 15 expert R&D and design engineers who each have more than 10 years' experience in product and equipment research and development. In addition, we have a variety of highly skilled after-sales service teams overseas to provide customers with professional after-sales support and assist customers in resolving issues with their after-sales products quickly.
Our products such as polyaluminium chloride are guaranteed to be reliable and of high quality thanks to our sophisticated detection technology. Additionally, we have special detection personnel who will inspect the product and ensure that it is tested.
We are a well-known manufacturing company of cooling water treatment chemicals that has been in business for more than 20 years. Our products were exported to Indonesia, Vietnam, Malaysia, Singapore, Thailand, Russia, Ecuador, Colombia, and other countries. More importantly, our products are well received by a variety of new and existing foreign customers. We have many satisfied customers, and many have developed a long-term cooperative relationships with us.
The company has years of experience in all aspects of procurement, sales, and production.
Address: #10 building GREAT SPACE, Minzhu street and Beihai road,Hanting district, weifang city.
Mobile:0086 13705361923
Email:[email protected]
Tel:0086 536 2252685
Fax: 0086 536 2252687
Weifang JS Trading Co., Ltd. | Privacy policy | Terms and Conditions
EN 
FR
ES
JA
RU
PT
AR
DE
IT