Weifang JS cationic polyacrylamide is a flexible polymer that dissolves in water and can be used to make paper and clean up wastewater. It is also used as a soil conditioner in agriculture to increase the growth of plants.
PAM can be made with different ion concentrations and molecular masses. The ion concentration affects the properties of the polymer, such as flocculation, thickening, shear resistance, and dispersion.
Cationic polyacrylamide (pam) from Weifang JS is a water-soluble polymer that has several applications. It is used as a retention aid in papermaking and as a flocculant in wastewater treatment.
It can also be used in cosmetics as a thickener. It is a good emulsifier and has antibacterial properties.
Over the forecast period, the product is expected to grow a lot because wastewater treatment is getting better. Its use as a material for electrophoresis or contact lens making will also help the market grow.
But concerns about the product's quality and effect on the environment are likely to make it less useful. Its use will be restricted by the high cost of raw materials.
A variety of cationic polyacrylamides are available on the market, including poly(N,N-dimethylacrylamide), poly(dimethyldiallylammonium chloride), and poly(acrylooxyethyltrimethyl ammonium chloride). These cationic polymers are used as primary organic coagulants to break emulsions and induce flocculation. They neutralize negatively charged colloidal particles and reduce sludge volume.
Weifang JS cationic polyacrylamide flocculant (CPAM) is a long-chain cationic polymer flocculant that is used to remove organic impurities from wastewater. It can also be used to reduce turbidity and algal suspension in water treatment processes.
During the flocculation process, particles are gently mixed, and long-chain polymers of low charge adsorb to the submicron flocs, facilitating the bridging of gaps between them (2a). This allows Van Der Waals forces to increase their flocculation range (b), until visible suspended macroflocs are formed.
Once the flocs have reached the right size and strength, they can be used for solid-liquid separation (c), either by centrifugation, filtration, or sedimentation. These processes will make the water a fine-grained liquid and eliminate any visible microscopic particles.
In municipal waste water treatment plants, cationic acrylamide polymer is often used to remove water from sludge. It is also commonly used to treat sewage sludge on agricultural land. It can reduce turbidity and algal suspension and is a cost-effective solution to this problem.
Cationic polyacrylamide from Weifang JS is a widely used thickener and is used in various industrial applications, including oil field production and wastewater treatment. It is a synthetic, long-chain homopolymer that has a high molecular weight and good solubility in water.
There are many types of acrylamide-based copolymers on the market. These include PAM (Fig. 1), HPAMNa (Fig. 2), AM/AMPS (Fig. 3), and AM/DMDAAC (Fig. 4).
These polymers come in a variety of structures and morphologies. Moreover, their dispersion in water solutions is also different.
For example, phosphate-containing acrylamide-based polymers exhibit ribbon-like chains. Contrary to this, acrylamide-based polymers that are hydroxyl-containing have parallel chains and ball-linked chains.
But there hasn't been much research on how acid affects the viscosity and molecular weight of acrylamide-based copolymers. This study looks at how high levels of hydrochloric acid affect four copolymers that are made from acrylamide.
Weifang JS Cationic polyacrylamide is a water-soluble, organic coagulant. It is used in various industrial and municipal wastewater treatment processes as well as in food processing and agriculture.
A typical cationic PAM is composed mainly of acrylamide monomers and has a molecular mass of around 5000. It may also contain a number of cationic monomers, including polydiallyldimethylammonium chloride (PDMDAAC), allyl triethyl ammonium chloride (ATAC), and ammonium alkyl (meth)acrylates.
You can choose the cationic monomers that best suit your needs. Among the most commonly used are N,N'-dimethylacrylamide (DMA), ethanaminium (N,N,N-trimethyl-2-(1-oxo-2-propenyl)oxy), and 1,2-dimethyl-5-vinylpyridinum.
Cationic PAM is a flocculant and coagulant. It can be used in a variety of flocculant applications, including oily waste treatment, dewatering, and filtration. It is also useful as a thickener and dispersant. It is particularly effective as a polymer in an emulsion. It is also used to treat oily water produced from sag and fracturing operations.
The company for poly aluminium chloride employs more than 15 engineers with experience in R&D and design.
We have advanced detection technology and equipment for pac poly aluminum chloride, and there are special detection personnel who follow the manufacturing of the product according to the indicators of the product to do the test. After the test can be packaged, if it is found to be insufficiently qualified, we will penalize the production personnel and determine the reason, which guarantees the quality and stability of our products.
We are a reputable manufacturer of chloride chemical with over 20 years of experience. Our products have been shipped to Indonesia, Vietnam, the Philippines, Malaysia, Singapore, Thailand, Russia, Ecuador, Colombia, and other countries. Many of our items are well received by both old and new customers. Therefore, many of them have established an ongoing relationship of cooperation with us and have built up an impressive number of faithful customers.
The company for polyaluminium chloride has years of expertise in all aspects of sales, procurement, and production.
Address: #10 building GREAT SPACE, Minzhu street and Beihai road,Hanting district, weifang city.
Mobile:0086 13705361923
Email:[email protected]
Tel:0086 536 2252685
Fax: 0086 536 2252687
Weifang JS Trading Co., Ltd. | Privacy policy | Terms and Conditions
EN 
FR
ES
JA
RU
PT
AR
DE
IT