Weifang JS polyaluminum chloride coagulant (PAC) is a basic primary coagulant used in many wastewater treatment facilities. The product is available in various grades and forms.
Over the past decades, PAC has been the preferred flocculant of choice for most wastewater treatment facilities. Many facilities are now looking for an alternative to hydrochloric acid or sodium aluminate because of the growing price gap.
Pac coagulant is a coagulant from Weifang JS that helps to remove suspended solids, organic matter, and bacteria from water. It is an inexpensive coagulant, consuming only a small amount of alkalinity.
As a result, PACs can be used in an extensive range of water treatment applications. They are a cost-effective alternative to alum, and can be used in line as well as pumped to contact tanks.
PAC can be made from a variety of materials and have a lower aluminum content and higher basicity than alum. As a result, they can be more efficient at clarifying water (i.e. They remove turbidity and suspended particles, while producing less aluminum in the backwash water.
.jpg)
PAC coagulant polyaluminum chloride water treatment from Weifang JS is a new type of coagulant used for treating water that combines neutralization and bridging capabilities. This is possible because PAC has long polymer chains and high positive electrical charges. The large molecular weights allow for particles to bind more effectively than other coagulants.
As a result, it has the ability to minimize flocculation of the clarified water even in excessive dosages. This allows the water to be treated economically and efficiently without producing sludge or increasing alkalinity.
In this study, a physicochemical treatment (coagulation-flocculation) was applied to automotive wastewater at the concentration dosage of 70 mg/L, accompanied by a flocculant aid dose of 2 mg/L of anionic polyacrylamide. At this optimum concentration, PAC was more efficient than FeCl3 or alum.
The strength factor of coagulants made from pure aluminum was high (most were around 70-75%), which indicates that flocs are highly resistant to shear forces. The dosage and coagulant were also important factors in the reflocculation factors. The PANS-PA reflocculation factors declined with increasing dosage, while they increased slightly for all other coagulants with higher doses.
Polyaluminum chloride (PAC) coagulants from Weifang JS are highly safe and are used for many applications including drinking water, wastewater and industrial effluent treatment. They are also very effective in removing suspended solids and turbidity.
PAC polyaluminum chloride uses often in combination with other coagulants, such as alum or ferric chloride to achieve high performance. The pH of the raw water and other parameters, such as temperature, NOM or dissolved organic carbon, will determine the optimal dosage.
PAC is effective in treating low turbidity water. It can also be used as a coagulant at pH 6.5-8.0 depending on the alum and ferric chloride dosages and the NOM characteristics. However, PAC doses over 20 mg/L seem to inhibit agglomeration of colloidal particles and impede coagulation-flocculation processes. This has been shown to have an adverse effect on aquatic organisms such as green algae, zooplankton and fish.
Weifang JS Coagulation refers to the addition of inorganic coagulants to water. This causes flocs to form that can remove large amounts of particles and dissolved material from water.
Organic coagulant is used as a coagulant in many different applications where it removes unwanted colours, contaminants and general turbidity (haze) from water. It is a versatile coagulant that can work well at a variety of pH and raw water temperatures.
It produces fewer chemical residuals than alum which is the most widely used coagulant in wastewater treatment. This reduces the amount of sludge that needs to be disposed of and therefore helps to lower operational costs.
PAC can be used in domestic and industrial wastewater treatment. It can be used with a higher pH and a wider range water temperatures than aluminium sulphate. It also produces less chemical and sulfate residuals and has a lower cost per litre of final treated water.
Our company for powder poly aluminium chloride coagulant pac employs over 15 experts in design and R&D engineering. Each engineer has over 10 years experience in product research and development. We also have experienced after-sales teams in different countries to help customers with solving problems related to their product.
We use the latest detection equipment and technology. There are special detection staff, who will conduct the test once the product has been produced. If the test is not passed the product will be thrown out and the reason revealed. This guarantees the quality and stability of the.
We are a professional manufacturing company with more than 20 years of experience in the industry. Our products are sold to many countries, including Indonesia, Vietnam and the Philippines, Malaysia as well as Singapore, Thailand. Russia is home to Ecuador as well as Colombia. More importantly, our products are also well received by a variety of new and existing foreign customers. They also have established long-term relationships with us which have resulted in a loyal customer base.
The company has a wealth of expertise in production, procurement, as well as sales. Our massive scale procurement and standardized manufacturing gives huge cost savings for our products. This allows us to offer our customers the best products, services, and prices.
Address: #10 building GREAT SPACE, Minzhu street and Beihai road,Hanting district, weifang city.
Mobile:0086 13705361923
Email:[email protected]
Tel:0086 536 2252685
Fax: 0086 536 2252687
Weifang JS Trading Co., Ltd. | Privacy policy | Terms and Conditions
EN 
FR
ES
JA
RU
PT
AR
DE
IT
